Markup Validation Service
Check the markup (HTML, XHTML, …) of Web documents
Markup Validation Service
Check the markup (HTML, XHTML, …) of Web documents
Line 24,
Column 87:
character "&" is the first character of a delimiter but occurred as data
…createElement("canvas"),a=t.getContext&&t.getContext("2d"),i=String.fromCharCo…This message may appear in several cases:
Line 24,
Column 89:
cannot generate system identifier for general entity "t.getContext"
…eateElement("canvas"),a=t.getContext&&t.getContext("2d"),i=String.fromCharCode…An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 24,
Column 89:
general entity "t.getContext" not defined and no default entity
…eateElement("canvas"),a=t.getContext&&t.getContext("2d"),i=String.fromCharCode…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 101:
reference not terminated by REFC delimiter
…"canvas"),a=t.getContext&&t.getContext("2d"),i=String.fromCharCode;return!(!a|…If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 24,
Column 101:
reference to entity "t.getContext" for which no system identifier could be generated
…"canvas"),a=t.getContext&&t.getContext("2d"),i=String.fromCharCode;return!(!a|…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 88:
entity was defined here
…reateElement("canvas"),a=t.getContext&&t.getContext("2d"),i=String.fromCharCod…….fromCharCode;return!(!a||!a.fillText)&&(a.textBaseline="top",a.font="600 32px…This message may appear in several cases:
Line 24,
Column 155:
character "&" is the first character of a delimiter but occurred as data
…fromCharCode;return!(!a||!a.fillText)&&(a.textBaseline="top",a.font="600 32px …This message may appear in several cases:
Line 24,
Column 272:
character "(" not allowed in attribute specification list
…6806,55356,56826),0,0),3e3<t.toDataURL().length):"diversity"===e?(a.fillText(i……6806,55356,56826),0,0),3e3<t.toDataURL().length):"diversity"===e?(a.fillText(i…You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
Line 24,
Column 876:
character "&" is the first character of a delimiter but occurred as data
…ion(){t.DOMReady=!0},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&…This message may appear in several cases:
Line 24,
Column 878:
cannot generate system identifier for general entity "t.supports.flag"
…n(){t.DOMReady=!0},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t.…An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 24,
Column 878:
general entity "t.supports.flag" not defined and no default entity
…n(){t.DOMReady=!0},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t.…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 893:
reference not terminated by REFC delimiter
…!0},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t.supports.divers…If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 24,
Column 893:
reference to entity "t.supports.flag" for which no system identifier could be generated
…!0},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t.supports.divers…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 877:
entity was defined here
…on(){t.DOMReady=!0},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t……!0},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t.supports.divers…This message may appear in several cases:
Line 24,
Column 895:
cannot generate system identifier for general entity "t.supports.unicode8"
…},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t.supports.diversit…An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 24,
Column 895:
general entity "t.supports.unicode8" not defined and no default entity
…},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t.supports.diversit…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 914:
reference not terminated by REFC delimiter
…&&t.supports.flag&&t.supports.unicode8&&t.supports.diversity||(a=function(){t.…If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 24,
Column 914:
reference to entity "t.supports.unicode8" for which no system identifier could be generated
…&&t.supports.flag&&t.supports.unicode8&&t.supports.diversity||(a=function(){t.…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 894:
entity was defined here
…0},t.supports.simple&&t.supports.flag&&t.supports.unicode8&&t.supports.diversi……&&t.supports.flag&&t.supports.unicode8&&t.supports.diversity||(a=function(){t.…This message may appear in several cases:
Line 24,
Column 916:
cannot generate system identifier for general entity "t.supports.diversity"
…t.supports.flag&&t.supports.unicode8&&t.supports.diversity||(a=function(){t.re…An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 24,
Column 916:
general entity "t.supports.diversity" not defined and no default entity
…t.supports.flag&&t.supports.unicode8&&t.supports.diversity||(a=function(){t.re…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 936:
reference not terminated by REFC delimiter
…upports.unicode8&&t.supports.diversity||(a=function(){t.readyCallback()},n.add…If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 24,
Column 936:
reference to entity "t.supports.diversity" for which no system identifier could be generated
…upports.unicode8&&t.supports.diversity||(a=function(){t.readyCallback()},n.add…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 915:
entity was defined here
…&t.supports.flag&&t.supports.unicode8&&t.supports.diversity||(a=function(){t.r……",function(){"complete"===n.readyState&&t.readyCallback()})),(a=t.source||{}).…This message may appear in several cases:
Line 24,
Column 1168:
cannot generate system identifier for general entity "t.readyCallback"
…function(){"complete"===n.readyState&&t.readyCallback()})),(a=t.source||{}).co…An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 24,
Column 1168:
general entity "t.readyCallback" not defined and no default entity
…function(){"complete"===n.readyState&&t.readyCallback()})),(a=t.source||{}).co…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 1183:
reference not terminated by REFC delimiter
…plete"===n.readyState&&t.readyCallback()})),(a=t.source||{}).concatemoji?o(a.c…If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 24,
Column 1183:
reference to entity "t.readyCallback" for which no system identifier could be generated
…plete"===n.readyState&&t.readyCallback()})),(a=t.source||{}).concatemoji?o(a.c…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 1167:
entity was defined here
…,function(){"complete"===n.readyState&&t.readyCallback()})),(a=t.source||{}).c……concatemoji?o(a.concatemoji):a.wpemoji&&a.twemoji&&(o(a.twemoji),o(a.wpemoji))…This message may appear in several cases:
Line 24,
Column 1246:
cannot generate system identifier for general entity "a.twemoji"
…ncatemoji?o(a.concatemoji):a.wpemoji&&a.twemoji&&(o(a.twemoji),o(a.wpemoji)))}…An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 24,
Column 1246:
general entity "a.twemoji" not defined and no default entity
…ncatemoji?o(a.concatemoji):a.wpemoji&&a.twemoji&&(o(a.twemoji),o(a.wpemoji)))}…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 1255:
reference not terminated by REFC delimiter
…?o(a.concatemoji):a.wpemoji&&a.twemoji&&(o(a.twemoji),o(a.wpemoji)))}(window,d…If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text.
Line 24,
Column 1255:
reference to entity "a.twemoji" for which no system identifier could be generated
…?o(a.concatemoji):a.wpemoji&&a.twemoji&&(o(a.twemoji),o(a.wpemoji)))}(window,d…This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 24,
Column 1245:
entity was defined here
…oncatemoji?o(a.concatemoji):a.wpemoji&&a.twemoji&&(o(a.twemoji),o(a.wpemoji)))……?o(a.concatemoji):a.wpemoji&&a.twemoji&&(o(a.twemoji),o(a.wpemoji)))}(window,d…This message may appear in several cases:
Line 24,
Column 1256:
character "&" is the first character of a delimiter but occurred as data
…o(a.concatemoji):a.wpemoji&&a.twemoji&&(o(a.twemoji),o(a.wpemoji)))}(window,do…This message may appear in several cases:
Line 25,
Column 11:
end tag for "t.toDataURL" omitted, but OMITTAG NO was specified
</script>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 24,
Column 260:
start tag was here
…xt(i(55356,56806,55356,56826),0,0),3e3<t.toDataURL().length):"diversity"===e?(…<div id="header" role="banner">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 117,
Column 343:
there is no attribute "srcset"
…orce" width="293" height="300" srcset="http://charlespigott.lookingforwhitman.…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 117,
Column 538:
there is no attribute "sizes"
…Barrel_vault_top_force.jpg 719w" sizes="(max-width: 293px) 100vw, 293px" /></p>You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 119,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 120,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 121,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 122,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 123,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 124,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 125,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 126,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 127,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 128,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 129,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center"><span style="text-decoration: underline;">Works Cited</span><…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 130,
Column 18:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p align="center">The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 131,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>Whitman, Walt. <em>The Uncollected Poetry And Prose Of Walt Whitman: Much Of…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 132,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Common Council.” <em>Brooklyn Daily Eagle</em> 16 Jan. 1844, Vo…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 133,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Brooklyn Has The Oldest Subway In The World.” <em>The Brooklyn …The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 134,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Opening Of The Tunnel.” <em>The Brooklyn Eagle</em> 05 Dec. 184…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 135,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Petitions.” <em>The Brooklyn Eagle</em> 17 Sept. 1844, Vol. 3 e…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 136,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Accident.” <em>Brooklyn Evening Star</em> 11 July 1844: 2-2. Pr…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 137,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Reported Murder In Brooklyn.” <em>Brooklyn Evening Star</em> 29…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 138,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Shocking Accident On The Long Island Railroad.” <em>The Brookly…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 139,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Atlantic Avenue Tunnel.” <em>The Brooklyn Eagle</em> 31 May 189…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 140,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“A Long Litigation Over the Matter of the Asessment for the Closing of…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 141,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Proposition to Re-occupy the Atlantic Avenue Tunnel- Railroad Managem…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 142,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“The Atlantic Avenue Tunnel.” <em>The Brooklyn Eagle</em> 5 July…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 143,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“L.I.R.R.’s New Terminal At Rockaway Beach.” <em>The Brook…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 144,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Atlantic Avenue Tunnel – A Romance.” <em>The New York Tim…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 145,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>Lovecraft, H.P. <em>Weird Tales: Seven Decades of Terror</em>. New York: Bar…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 146,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>“Interviewing Bob Diamond.” Personal interview. 6 Dec. 2009.</p>The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 147,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p>Image- http://upload.wikimedia.org/wikipedia/commons/e/e6/Barrel_vault_top_f…The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 148,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p><code><span class="vvqbox vvqflash" style="width:425px;height:350px;"><span …The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 149,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p><code><span class="vvqbox vvqflash" style="width:425px;height:350px;"><span …The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 150,
Column 3:
document type does not allow element "p" here; missing one of "object", "applet", "map", "iframe", "button", "ins", "del" start-tag
<p><code><span class="vvqbox vvqflash" style="width:425px;height:350px;"><span …The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.
One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
Line 151,
Column 10:
end tag for "p" omitted, but OMITTAG NO was specified
</div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 130,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 128,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 127,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 126,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 125,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 124,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 123,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 122,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 121,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 120,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 119,
Column 1:
start tag was here
<p align="center"> </div>You may have neglected to close an element, or perhaps you meant to "self-close" an element, that is, ending it with "/>" instead of ">".
Line 118,
Column 1:
start tag was here
<p align="center"> <form role="search" method="get" id="searchform" class="searchform" action=…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 312,
Column 12:
there is no attribute "role"
<ul role="navigation">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 389,
Column 76:
there is no attribute "aria-label"
…uicklinks" id="wp-toolbar" role="navigation" aria-label="Toolbar" tabindex="0">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 389,
Column 95:
there is no attribute "tabindex"
…uicklinks" id="wp-toolbar" role="navigation" aria-label="Toolbar" tabindex="0">You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 391,
Column 83:
there is no attribute "aria-haspopup"
…op"><a class="ab-item" aria-haspopup="true" href="http://charlespigott.lookin…You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
